
BFCL produces High Carbon and Low Carbon Silico Manganese in a range of grades with varying manganese, silicon and carbon content to meet diverse steelmaking requirements. It acts as an alloying agent, contributing to the desired properties of steel such as increased strength, hardness and resistance to wear and corrosion.
| Parameters | Mn | Si | C | P | S |
|---|---|---|---|---|---|
| Phos can also be 0.15% and 0.10% Max. | 60% Min | 14% Min | 2.50% Max | 0.20% Max | 0.03% Max |
| 65% Min | 16% Min | 2.00% Max | 0.20% Max | 0.02% Max | |
| 55% Min | 22% Min | 0.50% Max | 0.20% Max | 0.02% Max | |
| 60% Min | 28% Min | 0.10% Max | 0.20% Max | 0.02% Max |
| Parameters | Mn | Si | C | P |
|---|---|---|---|---|
| SiMn | 58% Min | 27-31 | 0.1% Max | 0.10% Max |
| 60% Min | 27-31 | 0.1% Max | 0.10% Max | |
| Low B with 100 PPM & 50PPM Max available on request. | ||||
| Parameters | Mn | Si | C | P |
|---|---|---|---|---|
| SiMn | 58% Min | 27-31 | 0.05% Max | 0.05% Max |
| 60% Min | 27-31 | 0.05% Max | 0.05% Max | |
| Low B with 100 PPM & 50PPM Max available on request. | ||||
Key details about BFCL Standard, Low Carbon, and Ultra Low Carbon Silico Manganese grades.
BFCL manufactures a complete range of Silico Manganese including Standard High Carbon Silico Manganese, Low Carbon Low Phos Silico Manganese, and Ultra Low Carbon Low Phos Silico Manganese to meet diverse steelmaking specifications.
Silico Manganese acts as both a powerful deoxidiser and an alloying agent. Combining manganese and silicon in a single alloy helps improve steel strength, toughness, cleanliness, and corrosion resistance while optimizing alloy additions.
Our Standard Silico Manganese grades include 60% Min Mn (14% Min Si, 2.50% Max C), 65% Min Mn (16% Min Si, 2.00% Max C), and 55% Min Mn (22% Min Si, 0.50% Max C), with phosphorus 0.20% Max (0.15% and 0.10% Max also available).
Both grades are offered in 58% Min and 60% Min Mn with 27–31% Silicon. Low Carbon Low Phos SiMn has 0.1% Max C and 0.10% Max P, while Ultra Low Carbon Low Phos SiMn achieves 0.05% Max C and 0.05% Max P.
Yes. For specialized alloy and stainless steelmakers, Low Boron Silico Manganese with 100 PPM Max and 50 PPM Max Boron is available on request across our Low Carbon and Ultra Low Carbon Low Phos grades.
Ferroalloys are essential steelmaking inputs because they help steel producers adjust the chemistry of molten steel to meet the requirements of a particular grade....
Read MoreA steel plant cannot use the same ferro manganese grade for every order. Stainless steel, construction steel and engineering steel may have different chemical...
Read MoreRaw materials form the foundation of ferroalloy manufacturing, making responsible procurement an important part of the ferroalloys industry. For manufacturers, sustainable sourcing involves more...
Read More