
MC & LC ferro Manganese is a refined ferro manganese used in making stainless steel and special grade steel to be further used in tool making, automobile Spare parts and heavy-duty machinery parts. We are among 9 producers globally to install advanced CLU Converter technology from UHT AB, Sweden, for manufacturing MC & LC Ferro Manganese.
| Parameters | Mn | Si | C | P |
|---|---|---|---|---|
| Phos can also be 0.15% and 0.10% Max. | 75% Min | 1% Max | 0.5% Max | 0.20% Max |
| 78% Min | 1% Max | 0.5% Max | 0.20% Max | |
| 80% Min | 1% Max | 0.5% Max | 0.20% Max | |
| 85% Min | 1% Max | 0.5% Max | 0.20% Max | |
| N 200 PPM Max, Low Ti, Low Si, Low B available on request. | ||||
High-carbon liquid metal is poured into CLU Converter and carbon is oxidised with oxygen and steam (Nitrogen is not used). Automated UTCASS Process Control takes care of the whole process and refined material of desired quality is produced. The CLU converter helps us to optimise natural resources by optimising the recovery of refined metal.

Key details about BFCL Low Carbon Ferro Manganese, CLU refining, and quality standards.
Low Carbon Ferro Manganese is a refined ferro alloy widely used in manufacturing stainless steel and special grade steels for tool making, automobile spare parts, and heavy-duty machinery components where strict carbon control is essential.
BFCL is among only 9 producers globally to install advanced CLU Converter technology from UHT AB, Sweden. High-carbon liquid metal is refined using oxygen and steam (without nitrogen), controlled by automated UTCASS Process Control.
We supply Low Carbon Ferro Manganese with 75% Min, 78% Min, 80% Min, and 85% Min Mn, Carbon 0.5% Max, and Silicon 1% Max. Standard phosphorus is 0.20% Max, and lower phosphorus grades of 0.15% Max and 0.10% Max can also be supplied.
Because the CLU Converter uses oxygen and steam rather than nitrogen, our Low Carbon Ferro Manganese maintains very low nitrogen levels (less than 200 PPM). Every batch is tested in our modern laboratory equipped with a Leco Carbon Analyser and XRF.
Automated UTCASS Process Control manages the refining cycle with minimal human intervention, ensuring repeatable chemistry, higher product purity, and reliable batch-to-batch consistency.
Ferroalloys are essential steelmaking inputs because they help steel producers adjust the chemistry of molten steel to meet the requirements of a particular grade....
Read MoreA steel plant cannot use the same ferro manganese grade for every order. Stainless steel, construction steel and engineering steel may have different chemical...
Read MoreRaw materials form the foundation of ferroalloy manufacturing, making responsible procurement an important part of the ferroalloys industry. For manufacturers, sustainable sourcing involves more...
Read More