
MC & LC ferro Manganese is a refined ferro manganese used in making stainless steel and special grade steel to be further used in tool making, automobile Spare parts and heavy-duty machinery parts. We are among 9 producers globally to install advanced CLU Converter technology from UHT AB, Sweden, for manufacturing MC & LC Ferro Manganese.
| Parameters | Mn | Si | C | P |
|---|---|---|---|---|
| Phos can also be 0.15% and 0.10% Max. | 75% Min | 1% Max | 1% Max | 0.20% Max |
| 78% Min | 1% Max | 1% Max | 0.20% Max | |
| 80% Min | 1% Max | 1% Max | 0.20% Max | |
| 85% Min | 1% Max | 1% Max | 0.20% Max | |
| N 200 PPM Max, Low Ti, Low Si, Low B available on request. | ||||
| Parameters | Mn | Si | C | P |
|---|---|---|---|---|
| Phos can also be 0.15% and 0.10% Max. | 75% Min | 1% Max | 1% Max | 0.25% Max |
| 78% Min | 1% Max | 1% Max | 0.20% Max | |
| 80% Min | 1% Max | 1% Max | 0.20% Max | |
| 85% Min | 1% Max | 1% Max | 0.20% Max | |
| N 200 PPM Max, Low Ti, Low Si, Low B available on request. | ||||
High-carbon liquid metal is poured into CLU Converter and carbon is oxidised with oxygen and steam (Nitrogen is not used). Automated UTCASS Process Control takes care of the whole process and refined material of desired quality is produced. The CLU converter helps us to optimise natural resources by optimising the recovery of refined metal.

Key details about BFCL Medium Carbon Ferro Manganese specifications and refining process.
Medium Carbon Ferro Manganese is a refined manganese alloy used in producing stainless steel, high-strength alloy steels, and special grade steels for tool manufacturing, automotive spare parts, and heavy-duty machinery.
Medium Carbon Ferro Manganese contains up to 1.0% Max Carbon (compared to 0.5% Max in Low Carbon grades), offering an optimal balance of cost efficiency and controlled carbon addition for steel grades that do not require ultra-low carbon limits.
BFCL supplies grades ranging from 75% Min, 78% Min, 80% Min, to 85% Min Mn with 1% Max Carbon and 1% Max Silicon. Phosphorus is available at 0.25% Max and 0.20% Max, with customized lower phosphorus options of 0.15% Max and 0.10% Max.
It is refined using advanced CLU Converter technology from UHT AB, Sweden with oxygen and steam (zero nitrogen blowing) under Automated UTCASS Process Control, achieving nitrogen content below 200 PPM.
All heats undergo rigorous in-house testing in BFCL’s modern quality control laboratory equipped with a Leco Carbon Analyser and XRF spectrometer to verify exact chemical compliance.
Ferroalloys are essential steelmaking inputs because they help steel producers adjust the chemistry of molten steel to meet the requirements of a particular grade....
Read MoreA steel plant cannot use the same ferro manganese grade for every order. Stainless steel, construction steel and engineering steel may have different chemical...
Read MoreRaw materials form the foundation of ferroalloy manufacturing, making responsible procurement an important part of the ferroalloys industry. For manufacturers, sustainable sourcing involves more...
Read More